What I Made

Wednesday, March 21, 2012

Sewing Diy: How to thread a bobbin case

Tuesday, March 20, 2012

Hey everyone! I hope everyone is doing good. Every machine is different, it's best that you refer to the instruction manual that came with your machine, but I hope this helps. This diy is for a domestic sewing machine. 
1. Place the bobbin into the bobbin case so that the actual case is in a clockwise position. 
2. Guide the bobbin thread into the slot.
3. Place the thread under the tension spring.
4. Pull the thread into the notch. 
5. Leave about 3-4 inches of thread hanging.


Selfie Saturday

Saturday, March 10, 2012